where to look up mac address in sccm properties

Once you have found the required properties of the MSFT_NetAdapter object using Get-Member, you can extract them as usual with Select-Object. Respectively: Get-NetAdapter -InterfaceIndex 3 The Name parameter also accepts wildcards, which allows you to access all interfaces that begin with 'Ethernet': Get-NetAdapter -Name Ethernet*Īlternatively, you can use the parameter InterfaceDescription and InterfaceIndex to filter the output: Get-NetAdapter -InterfaceDescription Real* This command only retrieves information from one interface to avoid displaying properties multiple times. However, Get-NetAdapter can retrieve more than 100 properties that you can display with the help of Get-Member: Get-NetAdapter -Name Ethernet0 | Get-Member -MemberType Property If you run the cmdlet without arguments, it reads all adapters and displays a few of their properties such as the MAC address, the status, and the link speed. If you want to get an overview of the available NICs and their statuses, Get-NetAdapter offers the most important information.

The main purpose for this is in my case is I use sccm for OS deployment as the devices use USB Ethernet adapters so I need the GUID to be the unique identifier not the MAC address of the adapter.Reading the configuration with Get-NetAdapter

This will never change unless the unique name is used for a different device. Once finished right click on the device and select properties and find the BIOS GUID and you should see the correct value. Next fill in the computer name and coping the information in the previous step into the SMSBIOS GUID. Once you have this information you can then add the GUID and machine name to sccm by selecting device and import computer information, then select single computer or computers if you have a CSV. There’s many reasons for doing this, in my case the machines in question do not have a built in Ethernet port so the unique identifier will not be the MAC address but instead will be the GUID. To import a computer into sccm using the GUID rather than the default MAC address you first need to find out the GUID of the device.This will be displayed during pxe boot or you can find it within command prompt.The example is below is in command prompt.

Where to look up mac address in sccm properties